Insys icom MIRO-L210 - Router

Router

DIN rail mountable

Wired

Ethernet, Fast Ethernet, digital input/output

TCP/IP, PPTP, UDP/IP, NTP, IPSec, PPPoE, ARP, DHCP, DNS, DDNS, IPv4, IPv6

OSPF, RIP-1, RIP-2, BGP, EIGRP, NHRP, static IP routing, GRE, RIPng, RSTP

Telnet, HTTP, HTTPS, SSH, CLI, ICMP

DES, RC2, MD5, CAST5, MPPE, DH, SHA-1, 128-bit AES, 256-bit AES, IKEv2, 256-bit AES-GCM, 128-bit AES-GCM, 256-bit AES-CBC, ESP, CRL, 128-bit Blowfish, 128-bit AES-CBC, IKEv1, SHA-256, SHA-512, SHA-224, Chacha20-Poly 1305

RADIUS, PAP, CHAP, X.509 certificates, MS-CHAP, MS-CHAP v.2

Firewall protection, NAT support, PAT support, SNAT support, auto-uplink (auto MDI/MDI-X), packet filtering, MAC address filtering, IP address filtering, half duplex mode, full duplex mode, firmware upgradable, Dead Peer Detection (DPD), Dynamic Multipoint VPN (DMVPN), port forwarding, DHCP relay, NTP server, event notification, Pre-Shared Key (PSK), NTP client, realtime clock, Simple Certificate Enrollment Protocol (SCEP), DNAT support, secure boot, 1500V isolation, VLAN Tagging, port trunking, IP forwarding support, PPTP client, PPTP server, OpenVPN client, OpenVPN server, event functions, Received Signal Strength Indication (RSSI) support, DHCPv4 server, DHCPv6 server

IEEE 802.1Q, EN55024, FCC Part 15 B, IC, EN 61000-6-2, EN 61000-6-3, EN 61131-2, IP40, EN 60068-2-1, EN 55032 Class B, EN 62368-1, IEC 62368-1, EN 60068-2-27, EN 60068-2-6, EN 60068-2-14, IEC 61709, EN 60068-2-2, CBC, EN 60068-2-30

Power, signal strength, WAN

Wireless cellular modem

UMTS, HSDPA, HSUPA, HSPA, LTE

3G, 4G

LTE B2, LTE B4, LTE B12, HSPA B2, HSPA B4, HSPA B5, UMTS B2, UMTS B4, UMTS B5

WAN / LAN: 2 x 10Base-T/100Base-TX - RJ-45 ¦ Antenna: 1 x SMA ¦ 1 x DI/DO

1 (total) / 1 (free) x Mini-SIM

DC 12 - 24 V

1.8 Watt

1,000,000 hours

Canada, United States

2.6 cm

7.7 cm

9.9 cm

94 g

-40 °C

75 °C

0 - 95% (non-condensing)